|Place of Origin:||china|
|Minimum Order Quantity:||1|
2 buttons Mutual-Duplicating remote control, remote duplicator can copy code from other RF remote control one by one, it is suitable for almost wireless Remote control, variable frequency 280Mhz ~ 500Mhz, 433.92MHz or 315MHz optional.
Mutual-Duplicating Remote Control
Model: A357 2 buttons
Variable frequency: 280Mhz ~ 500Mhz, 433.92MHz or 315MHz optional.
New 3rd Generation face to face copy remote, it compatible with Rolling code and fixed code
Compatible with these IC chip:
Fixed code chip: HT-12E, AX5326-3,.AX5326-4, AX5026, PT2262, PT2242, PT2240,HT600, HT680, HT6207,
HT6010, HT6012, HT6014, MC145026, HT640, EV1527, EV527, PT2260, SMC918 series
Rolling code chip: HCS101, HCS200 HS201(some pars of code), HCS300 HCS301(some pars of code) and some part of single chip.
Mutual Duplicating Remote Control copy code from old remote control one by one, it is the universal wireless remote control duplicator.
Application areas: anti-theft remote control car, motorcycle alarm remote control, electric vehicle anti-theft remote control, remote control rolling gates, garage door remote control, electric door openers, etc.
- Operating voltage: DC12V
- Operating current: 10MA
- Operating fixed frequency: 433.92MHz or 315MHz optional
-Operating frequency range is 280MHz to 500MHz.
- Item Size: 5.5cm x 3cm x 1.3cm
- Operating distance: Up to 100 meters
How to face to face copy:
- Before starting to copy the code, you need to know the function of each button
1. Code Clear
It’s necessary to clear the original codes of the copy code remote control. Press and hold the “arming” button and “disarming” button simutaneously for 2 seconds till the LED indicator flashes 3 times. Keep pressing the “arming” button and release the “disarming” button, then press the “disarming” button for 3 times within 5 seconds. The LED indicator slowly flashes 3 times then becomes fast flash to indicate the code clear is finished
2. Code Copy
With the original remote control on your one hand, with the copy code remote control on the other hand, approach the two remote controls to each other as close as possible. Press and hold the button to be learned on the original remote control and the button you want to learn on the copy code remote control simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the code is learned/copied successfully. Repeat the above steps to copy the code of other buttons
3. Code Retrive
In case if you lost the codes you are using by accident, don’t worry you can retrive them by following the step below: press and hold the “starting” button and “muting” button simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the codes are retrived now.
4. Frequency Adjustment
For fixed frequency copy, you can directly copy the code from other RF remote control. If not, if need to open the cover of the copy remote control and adjust the frequency with the great sense to meet the frequency of original remote control. For example, the frequency of the copy remote is 315MHz, but the original remote is 433MHz, you need to adjust the frequency of the copy remote from 315MHz to 433MHz.