|Place of Origin:||china|
|Minimum Order Quantity:||1|
ALL-100G High Speed Gang Programmer
Using multiple Socket Boards a single programmer can be used as a multi-site programmer for both low volume and high volume production. Using the USB port up to 8 sets of the ALL-200G can be connected to a single PC for either synchronous or asynchronous multi-site programming for maximum programming throughput.
The basic design uses very high frequency circuitry with 56 sets of 8 precision universal pin drivers to produce high speed, low noise, accurate and reliable programming signals. Each site is totally independent to eliminate interference during multi-site programming.
The supporting software is updated weekly and can be downloaded – free of charge – directly from our website. HiLo are always willing to add new devices when these are requested.
The All-100G can program up to 8 EPROM, EEPROM, FLASH, microcontrollers, Serial PROM and other device types. Based on the All-100 gang modules are available to hold 4, 6 or 8 devices and when you change part you only have to change the module, not the whole programmer. Support is provided for all of the latest package styles including DIP, PLCC, SOP/SOIC, TSOP, SSOP, QFP, TQFP, MQFP, BGA and others.
The ALL-100G uses an extremely high frequency core circuit design which significantly reduces the programming time of high density memory products. Precise Universal Pin Drivers provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to the market.
Wide range of IC coverage:The ALL-200G supports a wide range of IC products including EEPROM, Serial EE, SPI memory, NOR/NAND FLASH, MPU/MCU product types and DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA package types.
Easy to setup & operate:The ALL-200G setup and operation is very simpleeasily by connecting the Programmer to your Windows PC and a USB port. Simply load your data file or read a Master IC, then select the functional options (Program,Verify,Auto..etc.) to start programming.
Site independent parallel programming:The ALL-100G Programmer has 56 x 8 sets of Precise Universal Pin Drivers. Each site has its own individual Pin Driver so sites are totally independent without interfering with each other during multi-site programming.
The ALL-100G can be setup for multi-site & multi-set operation when required for production volumes. Up to 8 sites x 8 sets = 64 sites can be programmed simultaneously for maximize throughput.
High expansion flexibility: It is very easy to change the ALL-100G to program different device types simply by replacing the appropriate Socket Boards on the top of the Programmer.
Timely software updates:The software is updated weekly and this can be accessed directly from our website. Programming of new products will not be neglected once you have bought theprogrammer.
The ALL-100G gang programmers, supports programming just about every type of device with a programmable memory or configuration including EPROM, EEPROM, FLASH, PLD/CPLD/FPGA, microcontrollers, BPROM, Serial PROM, and much more. Over 12,000 device types are supported, with more being added every week. The ideal development programmer, you'll be hard pressed to find a device it doesn't support.